The Shure ULXP24-58 Handheld Wireless Microphone System offers an exceptional value in both performance and price.
The expanded feature set of the ULXP 4 wireless receiver, with advanced settings and controls including lockable settings and group scan, offers a direct path to full, clear audio signals.
Included is the now legendary Shure SM58 unidirectional (cardioid) dynamic vocal microphone that is designed for professional vocal use in live performance, sound reinforcement, and studio recording. It has a tailored vocal response for a sound which is a world standard for singing or speech. This system is perfect for your pastor and your praise team!
A highly effective, built-in spherical filter minimizes wind and breath “pop” noise. A cardioid pickup pattern isolates the main sound source while minimizing unwanted background noise. Rugged construction, a proven shock-mount system, and a steel mesh grille ensure that even with rough handling, the Shure ULX Profesional Wireless Microphone System will perform consistently, outdoors or indoors.
CONSUMER ALERT
Most users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device. Purchasers should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change. For more information, call the FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCC's wireless microphone website : www.fcc.gov/cgb/wirelessmicrophones
Click Here to View/Print ULX Professional Wireless Systems Spec Sheet
SM58® Handheld Microphone
- Type
- Dynamic (moving coil)
-
- Frequency Response
- 50 to 15,000 Hz
-
view larger
-
- Polar Pattern
- Unidirectional (cardioid), rotationally symmetrical about microphone axis, uniform with frequency
-
- Sensitivity (at 1,000 Hz Open Circuit Voltage)
- -54.5 dBV/Pa (1.85 mV)
- 1 Pa = 94 dB SPL
-
- Impedance
- Rated impedance is 150 ohms (300 ohms actual) for connection to microphone inputs rated low impedance
-
- Polarity
- Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3
-
- Connector
- Three-pin professional audio connector (male XLR type)
-
- Case
- Dark gray, enamel-painted, die cast metal; matte-finished, silver, spherical steel mesh grille
-
- Overall Dimensions
- See User Guide
-
- Net Weight
-
298 grams (10.5 oz)
NOTE:
For a list of compatible frequencies that are usable in your area, refer to the supplied frequency supplement.
RF Carrier Frequency Range
554.000 to 865.000 MHz (Available frequencies depend on the
applicable regulations in the country where the system is used).
Refer to the frequency supplement supplied with the system.
Effective Range
100 m (300 ft.) under optimal conditions
NOTE:
Actual working range depends on RF signal absorption,
reflection, and interference
Audio Frequency Response
25 to 15,000 Hz,
±2 dB
NOTE:
Overall system frequency response depends on the microphone
element.
*Output Level: Microphone Level = Line Level – 20 dB
Transmitter Audio Polarity
Positive pressure on microphone diaphragm (or positive voltage
applied to tip of WA302 phone plug) produces positive voltage
on pin 2 (with respect to pin 3 of low impedance output)
and the tip of the high impedance
1/4-inch output
Transmitter Gain Adjustment Range
ULX1: 25 dB
ULX2: 25 dB
Receiver Audio Output Level (
±38 kHz deviation, 1 kHz tone)
XLR connector (into 600 ohm load): +3.9 dBV (line), –17 dBV
(mic)
1
/4 inch connector (into 3000 ohm load): –2 dBV
Impedance
ULX1 (input): 1 Megohm
ULXS4, ULXP4 (output): 50 ohms at line level; 2000 ohms at
mic level
Modulation
±
38 kHz deviation compressor-expander system with pre- and
de-emphasis.
RF Power Output
ULX1, ULX2: 30 mW maximum
Dynamic Range
>100 dB, A-weighted
RF Sensitivity
1.26
ìV for 12 dB SINAD (typical)
Image Rejection
80 dB typical
Spurious Rejection
75 dB typical
Ultimate Quieting (reference
±38 kHz deviation)
>105 dB, A-weighted
System Distortion (reference
±38 kHz deviation, 1 kHz modulation)
0.3% total harmonic distortion, typical
Power Requirements
ULX1, ULX2: 9V alkaline battery (Duracell MN1604 recommended);
8.4V Nicad optional
ULXS4, ULXP4: 14 - 18 Vdc (negative ground), 550 mA
Battery Life
8 to 9 hours (with 9V Duracell MN1604 alkaline battery)
Operating Temperature Range
-20
° to 49° C (–4° to 120° F)
NOTE:
Battery characteristics may limit this range.
Overall Dimensions
ULX1: 96.5 mm H x 67 mm W x 26.7 mm D (3.86 x 2.68 x
1.10 in.)
ULX2/58, ULX2/BETA 58: 241 mm L x 51 mm Dia. (9.5 x 2 in.)
ULX2/87, ULX2/BETA 87: 216 mm L x 51 mm Dia. (8.5 x 2 in.)
ULX4S: 43 mm H x 214 mm W x 163 mm D (1.72 in. x 8.56 in.
x 6.52 in.)
ULX4P: 43 mm H x 214 mm W x 172 mm D (1.72 in. x 8.56 in.
x 6.88 in.)
Net Weight
ULX1: 79 g (2.8 oz.) without battery
ULX2/58, ULX2/BETA 58: 295 g (10.4 oz.) without battery
ULX2/87, ULX2/BETA 87: 193 g (6.8 oz.) without battery
ULXS4: 1049 g (2 lbs, 5 oz.)
ULXP4: 1105 g (2 lbs, 7 oz.)
