 |
 |
 |
|
Audio-Technica’s innovative 2000 Series wireless delivers professional performance unheard of in its class. With this breakthrough series, Audio-Technica makes easy setup, automatic scanning and other advanced wireless features affordable as never before.
Automatic frequency scanning—standard on all 2000 Series wireless receivers—finds and sets the best available channel
at the touch of a button. For those using multiple wireless systems simultaneously, the 2000 Series offers another ease-of-use standout: any of its 10 channels may be used together—eliminating confusing frequency groups and other frequency-coordination problems.
Choose from the following Congifurations:
Headset Mic - ATW-2192-TH: Includes ATW-R2100 receiver and ATW-T210 UniPak® Microphone System transmitter with AT892cW-TH omnidirectional condenser headworn microphone (beige,cocoa, or black). Includes element covers, windscreens and clothing clip.
Handheld Mic - ATW-2120: Includes ATW-R2100 receiver and ATW-T220 handheld cardioid dynamic microphone/transmitter.
or
Lavalier Mic - ATW-2129: Includes ATW-R2100 receiver and ATW-T210 UniPak® Microphone System transmitter with AT829cW lavalier microphone.
CONSUMER ALERT
Most users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device. Purchasers should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change. For more information, call the FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCC's wireless microphone website : www.fcc.gov/cgb/wirelessmicrophones
| Operating Frequency |
656.125 to 678.500 MHz |
|
| Number of Channels |
10 total |
|
| Frequency Stability |
±0.005%, Phase Lock Loop frequency control |
|
| Modulation Mode |
FM |
|
| Normal Deviation |
±5 kHz |
|
| Operating Range |
300' typical |
|
| Operating Temperature Range |
41° F (5° C) to 113° F (45° C) |
|
| Frequency Response |
100 Hz to 15 kHz |
|
|
RECEIVER SPECIFICATIONS
|
|
| |
| Receiving System |
Dual independent RF sections, automatic-switching diversity |
|
| Image Rejection |
55 dB nominal, 50 dB minimum |
|
| Signal-to-noise Ratio |
>100 dB at 40 kHz deviation (A-weighted), maximum modulation 40 kHz |
|
| Total Harmonic Distortion |
<1% (10 kHz deviation at 1 kHz) |
|
| Sensitivity |
20 dBµV (S/N 60 dB at 5 kHz deviation, IEC-weighted) |
|
| Intermediate Frequency |
65.75 MHz, 10.7 MHz |
|
| Audio Output |
Unbalanced: 25 mV (at 1 kHz, ±5 kHz deviation, 100k ohm load)
Balanced: 12.5 mV (at 1 kHz, ±5 kHz deviation, 100k ohm load) |
|
| Output Connectors |
Unbalanced: 1/4" (6.3 mm) phone jack
Balanced: XLRM-type |
|
| Power Supply |
120V AC 60 Hz, or 12-18V DC, 350 mA, with external supply |
|
| Dimensions |
8.27" (210.0 mm) W x 1.73" (44.0 mm) H
x 6.39" (162.2 mm) D |
|
| Weight |
2.2 lbs (1.0 kgs) |
|
| Accessories Included |
Two flexible UHF antennas, rack-mount adapters, AC adapter |
|
|
BODY-PACK TRANSMITTER SPECIFICATIONS
|
|
| |
| RF Power Output |
12 mW |
|
| Spurious Emissions |
Under federal regulations |
|
| Input Connections |
High impedance, low impedance, bias |
|
| Batteries |
Two 1.5V AA alkaline (not included) |
|
| Current Consumption |
150 mA typical |
|
| Battery Life |
Approximately 9 hours (depending on battery type and use pattern) |
|
| Dimensions |
2.60" (66.0 mm) W x 3.63" (92.3 mm) H x 0.89" (22.5 mm) D |
|
| Net Weight |
2.82 oz (80 g) |
|
|
|
HANDHELD TRANSMITTER SPECIFICATIONS
|
|
| |
| RF Power Output |
12 mW |
|
| Spurious Emissions |
Under federal regulations |
|
| Microphone Element |
Dynamic, unidirectional |
|
| Batteries |
Two 1.5V AA alkaline (not included) |
|
| Current Consumption |
150 mA typical |
|
| Battery Life |
Approximately 9 hours (depending on battery type and use pattern) |
|
| Dimensions |
9.02" (229.0 mm) long x 2.11" (53.5 mm) maximum diameter |
|
| Net Weight |
7.81 oz (221.5 g) |
|
| Accessory Included |
AT8456a Quiet-Flex™ stand clamp |
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
Serious advances in affordable professional wireless
Clear sound quality and rock-solid, dependable performance
Automatic frequency scanning finds an open channel at the touch of a button
All 10 user-switchable channels are compatible—for easy use with multiple systems; no confusing frequency groups
True Diversity operation selects the better signal from the two receiver sections, reducing dropouts
Tone Lock™ tone squelch system fights interference
Rugged metal half-rack receiver with soft-touch controls and LCD display featuring RF and AF metering
Balanced XLR and unbalanced 1/4” output jacks enable use with a wide variety of audio gear
Includes rack-mount kit and detachable UHF antennas
Ground-lift switch helps eliminate audible hum caused by ground loops between the sound system and receiver
ATW-T220 Handheld Microphone/Transmitter features PRO 41 Capsule for maximum feedback rejection and consistent sound
|
|
|
|
|
|
|
|
|
